Senior Analog and Mixed Signal Design Engineer

• Define SerDes link architecture for next-generation interfaces (224G/448G-class PAM4 electrical links, PCIe Gen7/Gen8, UCIe): channel analysis, link budget, jitter and noise budgeting, and equalization partitioning across TX FFE, RX CTLE, DFE, and ADC/DSP-based receivers.
• Build and maintain system-level link models (statistical and time-domain, in MATLAB or Python; COM and IBIS-AMI based) and use them to derive block-level specifications for TX, RX, ADC, and clocking circuits.
• Lead transistor-level design of critical SerDes blocks: TX drivers (SST/CML) with FFE, RX AFE (CTLE, VGA, termination, T-coil and ESD co-design), DFE and slicers, time-interleaved ADC front ends, CDR and phase interpolators, LC and ring PLLs, and clock distribution.
• Drive test-chip definition, integration, tapeout readiness, and silicon bring-up; correlate measured BER, eye, jitter, and power against models, and lead root-cause analysis of silicon-to-model gaps.
• Translate SerDes requirements into process and PDK requirements (device fT/fmax and parasitics, BEOL RC, inductor Q, matching, ESD capacitance budget, reliability and aging) and drive design-technology co-optimization with process, PDK, and template-library teams.
• Provide technical leadership: mentor engineers, lead design reviews, and represent Intel Foundry in technical engagements with IP partners and foundry customers.

Qualifications

You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the requirements and are considered a plus factor in identifying top candidates.

Minimum Qualifications

• Bachelors Degree in Electrical Engineering, Computer Engineering, or Electrical and Computer Engineering with 6+ years of industry experience in high-speed wireline SerDes circuit design experience -OR- Master's degree in Electrical Engineering, Computer Engineering, or Electrical and Computer Engineering with 4+ years of industry experience in high-speed wireline SerDes circuit design, -OR- Ph.D. in Electrical Engineering, Computer Engineering, or Electrical and Computer Engineering with 2+ years of industry experience in high-speed wireline SerDes circuit design.
• Experience in Transistor-level design of SerDes TX, RX, or clocking circuits in at least one silicon-proven design at 28 Gb/s per lane or higher.
• Experience in at least one of the following:
• SerDes link architecture: channel and link-budget analysis or equalization trade-off studies used to set block-level specifications.
• Lab validation of high-speed links: BER, eye, or jitter measurement and correlation to simulation.
• Behavioral or statistical link modeling in MATLAB or Python.

• Experience with Silicon-proven designs at 56 Gb/s PAM4 or higher, in FinFET or GAA CMOS; multiple tape-outs with block ownership.
• Experience across all three areas above (architecture, lab validation, and link modeling).
• Experience in ADC/DSP-based receivers at 112 Gb/s PAM4 or higher, including time-interleaved ADC design. - 224 Gb/s-class link development (IEEE 802.3dj, OIF CEI-224G). - PCIe Gen6/Gen7 PHY or UCIe die-to-die PHY development.
• Design experience on 5nm-class or more advanced nodes, with design-technology co-optimization experience with process teams.
• Experience in package and channel co-design: package/PCB channel modeling, signal and power integrity, crosstalk.
• Experience with first-author publications at ISSCC, VLSI Symposium, CICC, or JSSC; patents in SerDes circuits or architecture.
• Technical leadership of a multi-engineer SerDes design team through a full PHY delivery.

Take the next step to make an impact at Intel. Join us in redefining possibilities, driving innovation, and shaping the future of technology.

Job Type

Experienced Hire

Shift

Position of Trust N/A

We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock bonuses, and benefit programs which include health, retirement, and vacation. Find out more about the benefits of working at Intel.

Annual Salary Range for jobs which could be performed in the US: $141,910.00-269,100.00 USD

The range displayed on this job posting reflects the minimum and maximum target compensation for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific compensation range for your preferred location during the hiring process.

Work Model for this Role This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.

• ADDITIONAL INFORMATION: Intel is committed to Responsible Business Alliance (RBA) compliance and ethical hiring practices. We do not charge any fees during our hiring process. Candidates should never be required to pay recruitment fees, medical examination fees, or any other charges as a condition of employment. If you are asked to pay any fees during our hiring process, please report this immediately to your recruiter.