Principal PCS/PMA RTL Design Engineer

• Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field.
• Master's degree is preferred.
• 3+ years of relevant experience in digital ASIC, SoC, or RTL design, or equivalent academic and industry experience.
• Hands-on experience with Verilog or SystemVerilog RTL development.
• Understanding of digital design fundamentals, including combinational and sequential logic, clocks, resets, state machines, datapaths, FIFOs, and interfaces.
• Working knowledge of at least one high-speed serial protocol (Ethernet, PCIe, UCIe, UALink, CXL, or similar) at the PCS/PHY layer.
• Experience with RTL simulation, debugging, synthesis, and basic timing analysis.
• Familiarity with ASIC design flows and collaboration across design and verification teams.
• Strong communication skills and the ability to work effectively in a collaborative, fast-paced environment.
• Ability and willingness to work onsite in San Jose, California.

• Direct experience designing PCS, PMA, or PHY digital logic for Ethernet (25G–224G per lane, 100G/200G/400G/800G/1.6T), PCIe (Gen4/5/6/7), UCIe, UALink, CXL, or similar standards.
• Experience with PAM4 signaling, FEC (RS-FEC/KP4, FLIT-mode FEC/CRC), lane deskew/alignment, link training, and equalization control.
• Familiarity with the PIPE specification, 802.3 Clause 73/72/136/162-series, PCIe LTSSM, and UCIe link training and sideband.
• Experience with multi-lane, multi-rate SerDes digital datapaths and clocking architectures.
• Familiarity with interconnect, networking, or data-center ASICs (retimers, switches, NICs, DPUs, SmartNICs, NoCs).
• Familiarity with synthesis and implementation tools such as Cadence Genus/Innovus or Synopsys Design Compiler/ICC2.
• Experience with STA using tools such as Synopsys PrimeTime or Cadence Tempus.
• Familiarity with lint, CDC/RDC, DFT, scan, GLS, LEC, UPF, or formal-verification flows.
• Experience with UVM, SystemVerilog Assertions, functional coverage, or verification-plan development.
• Experience with Python, Tcl, Perl, Shell, or other scripting languages for design and verification automation.
• Exposure to advanced-node CMOS design (e.g., 5nm/3nm), tapeout, silicon bring-up, or post-silicon validation, including BER measurements and lab debug.
• Experience working with physical-design teams on floorplanning, congestion, timing, power, and implementation challenges.

Salary range is $185,000 to $240,000 depending on experience, level, and business need. This role may be eligible for discretionary bonus, incentives and benefits.

We know that creativity and innovation happen more often when teams include diverse ideas, backgrounds, and experiences, and we actively encourage everyone with relevant experience to apply, including people of color, LGBTQ+ and non-binary people, veterans, parents, and individuals with disabilities.

• Develop synthesizable Verilog/SystemVerilog RTL for PCS and PMA digital blocks supporting Ethernet, PCIe, UCIe, UALink, and related protocols.
• Implement PCS functions such as line encoding/decoding (64b/66b, 128b/130b, 8b/10b), scrambling/descrambling, block and word alignment, lane deskew and reordering, gearboxes, elastic buffers/FIFOs, and rate adaptation.
• Implement forward error correction (e.g., RS-FEC/KP4, FEC framing, interleaving), plus the related error counters and status logic.
• Implement PMA digital interface logic, including SerDes datapath interfaces (PIPE, SerDes-facing parallel interfaces, UCIe PHY/raw-die interfaces), clock and data recovery (CDR) control interfaces, equalization and link-training control (e.g., PCIe LTSSM equalization, Ethernet auto-negotiation/link training), and calibration and adaptation control.
• Design lane-level and multi-lane logic, including lane bonding, polarity and lane reversal, PRBS generation/checking, loopback modes, and BIST features.
• Translate architectural and microarchitectural specifications into datapaths, control logic, state machines, register interfaces, and protocol logic.
• Design reusable, configurable RTL modules that support multiple protocols, data rates, and lane configurations.
• Integrate internal and third-party IP (including analog/mixed-signal PHY macros) while following established design and coding methodologies.
• Participate in design reviews and contribute to improvements in RTL quality, reuse, latency, performance, power, and area.

• Collaborate with design verification engineers to define functional requirements, test plans, and coverage goals, including protocol compliance (IEEE 802.3, PCI-SIG, UCIe, UALink specifications).
• Debug simulation failures using waveform analysis, assertions, regression results, and root-cause analysis.
• Support lint, clock-domain crossing (CDC), reset-domain crossing (RDC), and RTL quality checks, with particular attention to multi-clock-domain PCS/PMA boundaries and asynchronous lane clocks.
• Participate in UVM-based verification activities and help resolve functional and integration issues.
• Support gate-level simulation and regression debug as required.

• Support logic synthesis, constraints development, and design implementation flows for high-speed, wide-datapath designs.
• Perform Static Timing Analysis (STA) and help identify and resolve setup, hold, clock, and interface timing issues, including at the SerDes and PHY boundaries.
• Support timing closure, power optimization, and PPA trade-offs in collaboration with synthesis, timing, and physical-design teams.
• Assist with DFT integration, scan requirements, low-power intent (including per-lane power states), ECOs, and implementation signoff.
• Review reports and debug issues from Cadence and/or Synopsys digital design flows.

• Support block-level and subsystem-level integration through tapeout milestones.
• Collaborate with SerDes/analog, physical design, DFT, firmware, systems, packaging, and validation teams.
• Participate in silicon bring-up, link bring-up, interoperability and compliance testing, post-silicon debug, and failure analysis as opportunities arise.
• Document design decisions, issues, and technical solutions clearly for cross-functional stakeholders.

Astera Labs (NASDAQ: ALAB) provides rack-scale AI infrastructure through purpose-built connectivity solutions. By collaborating with hyperscalers and ecosystem partners, Astera Labs enables organizations to unlock the full potential of modern AI. Astera Labs’ Intelligent Connectivity Platform integrates CXL®, Ethernet, NVLink, PCIe®, and UALink™ semiconductor-based technologies with the company’s COSMOS software suite to unify diverse components into cohesive, flexible systems that deliver end-to-end scale-up, and scale-out connectivity.

The company’s custom connectivity solutions business complements its standards-based portfolio, enabling customers to deploy tailored architectures to meet their unique infrastructure requirements. Discover more at www.asteralabs.com.